BCDLV - BOSTIK 7434
- MSDS: BCDLV
- Manufacturer: BOSTIK DIV USM CORP EMHART INDUSTRIES INC
- Product Name: BOSTIK 7434
- National Stock Number: 8040-00K002595
Product Identification
Product ID:BOSTIK 7434
MSDS Date:01/01/1987
FSC:8040
NIIN:00K002595
MSDS Number: BCDLV
Responsible Party
Emergency Phone: (617)777-0100
Cage: EO452
Contractor
Telephone: 508-777-0100
Cage: 70707
Ingredients
ETHYL CYANOACRYLATE
Fraction By Weight: 90.0%
ACGIH TLV: NOT KNOWN
Hazards
Effects of Overexposure:LACHRYAMTOR,IRRITATION OF MUCOUS MEMBRANES OF
NOSE & THROAT.
First Aid
First Aid:SKIN CONTACT;FLUSH IMMED W/WATER TO CAUSE
POLYMERIZATION.REMOVE SOLID W/ACETONE/NAIL POLISH REMOVR;EYE
CONTACT;IRRIGATE IMMEDIATELY & THOROYGHLY W/WATER HOLDING LIDS
APART SO THAT THEY DO NOT ADHERE.G ET MED ATTN.
Fire Fighting
Flash Point:176F TOC
Extinguishing Media:CO*2, FOAM, DRY CHEM.
Fire Fighting Procedures:USE AIR MASK PER MFR.
Unusual Fire/Explosion Hazard:NONE NOTED BY MFR.
Accidental Release
Spill Release Procedures:PROVIDE GOOD VENTILATION.USE PROTECTIVE
GLOVES,SAFETY GLASSES/GOGGLES,RUBBER BOOTS.SOAK UP(SMALL SPILL) ON
ABSORBANT MATL.IMMERS IN PAIL OF H*2O TO POLYMERIZE;LG SPILL:DIKE
W/COMM ABSORBNT;DILUTE W/LG AMT H*2O TO POLYMERIZE.SHOVEL SOLID
TOSALVG TNK
Handling
Handling and Storage Precautions:STORE IN COLD STORAGE.KEEP CONTAINER
TIGHTLY CLOSED WHEN NOT IN USE. AVOID PHYSICAL DAMAGE TO CONTAINER.
Other Precautions:AVOID CONTACT WITH SKIN,EYES & CLOTHING.USE WITH
VENTILATION ADEQUATE TO MAINTAIN CONCENTRATION OF VAP BELOW
IRRITATION LEVEL.
Exposure Controls
Respiratory Protection:NONE
Ventilation:LOCAL EXHAUST PREFERRED,MECHANICAL EXHAUST ACEPTABLE.
Protective Gloves:IMPERVIOUS
Eye Protection:GOGGLES
Other Protective Equipment:SAFETY SHOWER & EYE BATH
Supplemental Safety and Health
MSDS FM MFR DATED:5/2/80;VAP PRESSURE AT 20C.
Chemical Properties
HCC:V4
Boiling Pt:B.P. Text:176F
Vapor Pres:<1
Vapor Density:4.3
Spec Gravity:1.10
Evaporation Rate & Reference:NR
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WATER-WHITE VISCOUS LIQ WITH ESTER-LIKE ODOR
Percent Volatiles by Volume:0
Stability
Stability Indicator/Materials to Avoid:YES
NOT KNOWN
Stability Condition to Avoid:AVOID HIGH TEMP/HUMIDITY & MANY COMM MATL
CAUSE POLYMRZTION.
Hazardous Decomposition Products:CO, CO*2, NITROUS OXIDES, CYANIDE &
OTHER TOXIC FUMES.
Conditions to Avoid Polymerization:AVOID MOISTURE & OTHER MATL WHICH
MAY BE EXOTHRMC/CAUSE POLY
Disposal
Waste Disposal Methods:INCINERATE IN APPROVED INCINERATOR OR DISPOSE OF
IN APPROVED CHEMICAL DUMP IN ACCORDANCE WITH LOCAL,STATE & FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.